Speaker
Showing 25–34 of 34 results
-
Speakers & Mixers
TOA SC-630M-30W REFLEX HORN SPEAKER
Specification:
Rated Input: 30 W
Line Voltage: 100 V line or 70 V line
Rated Impedance: 100 V line: 330 Ω (30 W), 670Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W)
Sound Pressure Level: 113 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level)
Frequency Response: 250 Hz – 10 kHz
Dust/Water Protection: IP65
Polarity: Hot: Black, Com: White
Operating Temperature: -20 ℃ to +55 ℃ (must be free from dew condensation)
Finish: Horn flare: Aluminum, off-white, powder coating Reflector horn and rear cover: ABS resin, off-white Bracket, screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length)
Dimensions: 285 (W) × 227 (H) × 277 (D) mm
Weight: 2 kg
Option: Swivel bracket: YS-151S (Can be used instead of the supplied bracket.)
SKU: TOASPK38 -
Speakers & Mixers
TOA SC-651-50W REFLEX HORN SPEAKER
Specification:
Rated Input: 50 W (Mobile Mount use: 30 W)
Rated Impedance: 16 Ω
Sensitivity: 109 dB (1 W, 1 m)
Frequency Response: 250 Hz – 6 kHz
Dust/Water Protection: IP65
Polarity: Hot: Black, Com: White
Operating Temperature: -20 ℃ to +55 ℃ (-4 ゜F to 131 ゜F) (must be free from dew condensation)
Finish: Horn flare: Aluminum, off-white, powder coating Reflector horn: ABS resin, off-white Bracket holder: Aluminum, gray, powder coating Bracket: Steel, gray, powder coating Rear cover: ABS resin, gray Screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm (0.24″) in diameter, 600 mm (23.62″) in length)
Dimensions: 430 (W) × 297.5 (H) × 327 (D) mm (16.93″ × 11.71″ × 12.87″)
Weight: 3.4 kg (7.5 lb)
SKU: TOASPK39 -
Speakers & Mixers
TOA SR-H3L- LINE ARRAY SPEAKER
Specification:
Power Handling Capacity: Continuous program: 360 W
Rated Impedance: 8 Ω
Sensitivity: 92 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response: 90 Hz – 17 kHz (when recommended parameters are applied by the optional DP-SP3)
Directivity Angle: Horizontal: 90゜ Vertical: 20゜
Speaker Component: 7 cm (2.8″) cone-type × 16
Input Connector: Removable input connector
Finish: Enclosure: MDF, white, urethane paint Front grille: Punched steel plate, white, acrylic paint
Dimensions: 84 (W) × 1177.2 (H) × 157 (D) mm (3.31″ × 46.35″ × 6.18″)
Weight: 7.9 kg (17.42 lb)
Option: Matching transformer: MT-S0301 Extension plate: SR-EP3 Wall mounting bracket: SR-WB3 Wall tilt bracket: SR-TB3 Flying bracket: SR-FB3 Stand adapter: SR-SA3 (Applicable stand: ST-34B) Digital speaker processor: DP-SP3
SKU: TOASPK41 -
Speakers & Mixers
TOA SR-H3S LINE ARRAY SPEAKER
Specification:
Power Handling Capacity: Continuous program: 360 W
Rated Impedance: 8 Ω
Sensitivity: 92 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response: 90 Hz – 17 kHz (when recommended parameters are applied by the optional DP-SP3)
Directivity Angle: Horizontal: 90゜ Vertical: 20゜
Speaker Component: 7 cm (2.8″) cone-type × 16
Input Connector: Removable input connector
Finish: Enclosure: MDF, white, urethane paint Front grille: Punched steel plate, white, acrylic paint
Dimensions: 84 (W) × 1177.2 (H) × 157 (D) mm (3.31″ × 46.35″ × 6.18″)
Weight: 7.9 kg (17.42 lb)
Option: Matching transformer: MT-S0301 Extension plate: SR-EP3 Wall mounting bracket: SR-WB3 Wall tilt bracket: SR-TB3 Flying bracket: SR-FB3 Stand adapter: SR-SA3 (Applicable stand: ST-34B) Digital speaker processor: DP-SP3
SKU: TOASPK42 -
Speakers & Mixers
TOA SR-S4L-2 WAY LINE ARRAY SPEAKER
Specification:
Power Handling Capacity: Continuous program: 600 W (single-amp mode) Low 240 W, High 240 W (bi-amp mode)
Rated Impedance: 8 Ω (single-amp mode) Low 8 Ω, High 8 Ω (bi-amp mode)
Sensitivity: 93 dB (1 W, 1 m)
Frequency Response: 70 Hz – 20 kHz (when recommended parameters are applied by the optional DP-SP3)
Crossover Frequency: 3.5 kHz
Directivity Angle: Horizontal: 90゜, Vertical: 10゜
Speaker Component: Low frequency: 10 cm cone-type × 8 High frequency: 2.5 cm balanced dome-type × 24
Input Connector: M5 screw terminal, distance between barriers: 12.2 mm and Neutrik NL4MP × 2
Finish: Enclosure: MDF, white, paint Front grille: Punched steel plate, white, acrylic paint
Dimensions: 160 (W) × 892 (H) × 303 (D) mm
Weight: 16 kg
Accessory: Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
Option: Matching transformer: MT-S0601, Extension plate: SR-EP4, Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4, Protection pad: SR-PP4, Digital speaker processor: DP-SP3
SKU: TOASPK43 -
Speakers & Mixers
TOA SR-S4S-2 WAY LINE ARRAY SPEAKER
Specification:
Power Handling Capacity: Continuous program: 600 W (single-amp mode) Low 240 W, High 240 W (bi-amp mode)
Rated Impedance: 8 Ω (single-amp mode) Low 8 Ω, High 8 Ω (bi-amp mode)
Sensitivity: 93 dB (1 W, 1 m)
Frequency Response: 70 Hz – 20 kHz (when recommended parameters are applied by the optional DP-SP3)
Crossover Frequency: 3.5 kHz
Directivity Angle: Horizontal: 90゜, Vertical: 10゜
Speaker Component: Low frequency: 10 cm cone-type × 8 High frequency: 2.5 cm balanced dome-type × 24
Input Connector: M5 screw terminal, distance between barriers: 12.2 mm and Neutrik NL4MP × 2
Finish: Enclosure: MDF, white, paint Front grille: Punched steel plate, white, acrylic paint
Dimensions: 160 (W) × 892 (H) × 303 (D) mm
Weight: 16 kg
Accessory: Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
Option: Matching transformer: MT-S0601, Extension plate: SR-EP4, Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4, Protection pad: SR-PP4, Digital speaker processor: DP-SP3
SKU: TOASPK44 -
Speakers & Mixers
TOA SR-TB3SA-WALL TILT BRACKET
Specification:
Applicable Speaker: SR-H3S, SR-H3L, SR-H2S, SR-H2L
Finish: Steel plate, white, paint
Dimensions: 64 (W) × 296 (H) × 50 (D) mm (2.52″ × 11.65″ × 1.97″)
Weight: 1.4 kg (3.09 lb)
Product Composition: Speaker mounting bracket …2, Bracket A …1, Bracket B …1, Joint bracket …1
Accessory: Bracket assembling bolt (hex bolt M6 × 16 (with washer)) …10, Speaker mounting bolt (hex bolt M5 × 25 (with washer)) …4
SKU: TOASPK47 -
Speakers & Mixers
TOA SR-TB4SA-WALL TILT BRACKET
Specification:
Number of Speakers to be Mounted: 1
Finish: Steel plate, white, paint
Dimensions: 166 (W) × 247 (H) × 201 (D) mm (complete assembly)
Weight: 3.2 kg
Product Composition: Speaker mounting bracket …1, Bracket base …1
Accessory: Bracket assembling screw (M8 upset head) …4, Speaker mounting screw (M5 upset head) …8
SKU: n/a -
Speakers & Mixers
TOA TZ-606B- 60W BLACK COLUMN SPEAKER
Specification:
Rated Input: 60 W
Rated Impedance: 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 1.3 kΩ (7.5 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 1.3 kΩ (3.8 W)
Sensitivity: 95 dB (1 W, 1 m)
Frequency Response: 150 Hz – 16,000 Hz
Speaker Component: 10 cm cone-type × 6
Input Terminal: Push-In terminal
Finish: Enclosure: HIPS, white Punched Net: Surface-tread steel plate, white, paint Speaker Bracket: Aluminum die-cast, white, paint Joint Bracket, Wall Bracket: Steel plate, t1.6, white, paint
Dimensions: 135 (W) × 746 (H) × 128 (D) mm
Weight: 5.5 kg (unit only)
Accessory: Speaker Bracket x 1, Joint Bracket x 1, Wall Bracket x 1, Fixing Bolt (M5 x 60) x 1, Hexagon Bolt (M6 x 12) (with plain washer and spring washer) x 2, Machine Screw (M5 x 20) (with plain washer and spring washer) x 2, Hexagon Bolt (M8x 15) x 1
Option: Speaker Stand: ST-16A
SKU: TOASPK45 -
Speakers & Mixers
TOA TZ-606W-60W BLACK COLUMN SPEAKER
Specification:
Rated Input: 60 W
Rated Impedance: 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 1.3 kΩ (7.5 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 1.3 kΩ (3.8 W)
Sensitivity: 95 dB (1 W, 1 m)
Frequency Response: 150 Hz – 16,000 Hz
Speaker Component: 10 cm cone-type × 6
Input Terminal: Push-In terminal
Finish: Enclosure: HIPS, white Punched Net: Surface-tread steel plate, white, paint Speaker Bracket: Aluminum die-cast, white, paint Joint Bracket, Wall Bracket: Steel plate, t1.6, white, paint
Dimensions: 135 (W) × 746 (H) × 128 (D) mm
Weight: 5.5 kg (unit only)
Accessory: Speaker Bracket x 1, Joint Bracket x 1, Wall Bracket x 1, Fixing Bolt (M5 x 60) x 1, Hexagon Bolt (M6 x 12) (with plain washer and spring washer) x 2, Machine Screw (M5 x 20) (with plain washer and spring washer) x 2, Hexagon Bolt (M8x 15) x 1
Option: Speaker Stand: ST-16A
SKU: TOASPK46