Speaker
Showing 1–24 of 34 results
-
-
-
Speakers & Mixers
RCS CS-115 Round Cabinet Speaker, 15w-Black
TECHNICAL SPECIFICATION
- Active/Passive : Passive
- Outdoor use : No
- Permanent Installation : Yes
- Balanced Audio Input (XLR) : No
- Weight : 2.1 Kg
- Ethernet, GigE (RJ45) : No
- Wireless connection : No
- Placement : Wall/Ceiling
- Max power output : 30W
- Array of drivers : 2 way
- 100V support : Yes
SKU: RCS-COL-SPK-01 -
Speakers & Mixers
RCS CS-115 Round Cabinet Speaker, 15w-White
TECHNICAL SPECIFICATION
- Active/Passive : Passive
- Outdoor use : No
- Permanent Installation : Yes
- Balanced Audio Input (XLR) : No
- Weight : 2.1 Kg
- Ethernet, GigE (RJ45) : No
- Wireless connection : No
- Placement : Wall/Ceiling
- Max power output : 30W
- Array of drivers : 2 way
- 100V support : Yes
SKU: RCS-COL-SPK-02 -
Speakers & Mixers
TOA BS-1030WHITE-2-WAY BASE-REFLEX SPEAKER
Enclosure 2-way bass-reflex type Rated Input 30 W Rated Impedance 8 Ω
100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W)Sound Pressure Level 90 dB (1 W, 1 m) Frequency Response 80 Hz – 20 kHz Speaker Component 12 cm cone-type + dome-type Speaker Cord 2-core cabtyre cord with diameter of 6 mm Operating Temperature -10 ℃ to +50 ℃ Water Protection IPX4 (can be installed vertically or horizontally.*) Finish Enclosure: ABS resin, white (RAL9010 PURE WHITE), paint
Net: Surface treated steel plate, white (RAL9010 PURE WHITE), powder coating
Bracket: Surface treated steel plate, white equivalent to RAL9010 PURE WHITE,
powder coatingDimension 196 (W) × 290 (H) × 150 (D) mm (unit only) Weight 2.5 kg (unit only) Accessory Bracket…1, Bracket mounting screw…2, Bracket mounting washer…2 Option Mounting bracket: SP-420
Applicable bracket: WCB-13W, SP-410
Applicable stand: ST-16ASKU: TOASPK02 -
Speakers & Mixers
TOA BS-301B-SATELLITE SPEAKER-BLACK
Power Handling Capacity: Continuous program: 160 W* ×2 channels Continuous pink noise: 80 W* ×2 channels
Rated Impedance: 4 Ω* ×2 channels
Sensitivity: 81 dB (1 W, 1 m)* ×2 channels
Frequency Response: 40 Hz – 20 kHz* ×2 channels
Weight: 13.9 kg (30.64 lb) (excluding mounting bracket)
Subwoofer: Rated impedance: 6 Ω ×2 channels Speaker component: 16 cm (6.5″) cone-type ×2 channels Finish: Front panel…ABS resin, black Enclosure…Wood, black Speaker bracket…Steel plate, black, paint Dimensions: 210 (W) × 390 (H) × 563 (D) mm (8.27″ × 15.35″ × 22.17″) Weight: 11.5 kg (25.35 lb) (excluding mounting bracket)
Satellite Speaker: Rated impedance: 8 Ω Speaker component: 8 cm (3″) cone-type Finish: Enclosure, Front panel…HIPS resin, black Speaker bracket…Steel plate, black, paint Dimensions: 92 (W) × 97.5 (H) × 100 (D) mm (3.62″ × 3.84″ × 3.94″) Weight: 600 g (1.32 lb) (excluding mounting bracket)
Product Composition: Subwoofer…1, Satellite speaker…4
Accessory: Subwoofer mounting bracket (black)…4, Rubber foot and fixing screw for subwoofer…4, Subwoofer mounting screw…4, Satellite speaker mounting bracket (black)…6, Satellite speaker mounting screw …8, Sticker for satellite speaker
SKU: TOASPK03 -
Speakers & Mixers
TOA BS-678BT-WALL MOUNT SPEAKER-6W
Specification Rated Input 6 W (100 V line), 3 W (70 V line) Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)Sensitivity 94 dB (1 W, 1 m) (500 Hz – 5 kHz, pink noise) Frequency Response 150 Hz – 20 kHz (peak -20 dB) Speaker Component 16 cm (6″) double cone-type Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid wire: φ0.8 – φ1.6 mm (equivalent to AWG 20 – 14)
7-core twisted wire: 0.75 – 1.25 m㎡ (equivalent to AWG 18 – 16)Connection Push-in connector (bridging terminal) Attenuation OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB) Finish Baffle: HIPS, black (RAL 9011 or equivalent color)
Cabinet: Particle board with pvc sheet, black (RAL 9011 or equivalent color)
Grille: Surface-treated steel plate net, black (RAL 9011 or equivalent color)Dimensions 250 (W) × 190 (H) × 110 (D) mm (9.84″ × 7.48″ × 4.33″)
(excluding volume control knob)Weight 1.7 kg (3.75 lb) Accessory Speaker mounting screw (4 × 35 (0.16″ × 1.38″)) …2 SKU: n/a -
Speakers & Mixers
TOA CS-304- SPLASH PROOF PROJECTION
Specification:
Rated Input: 30 W
Rated Impedance: 100 V line: 330 Ω (30 W), 500 Ω (20 W), 1 kΩ (10 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W)
Sensitivity: 98 dB (1 W, 1 m)
Frequency Response: 120 – 15,000 Hz
Speaker Component: 12 cm cone-type
Horizontal Directivity: Constant directivity horn 90゜ (±45゜ horizontal from front axis) 93 dB or more (1 W, 1 m), 3 kHz at ±45゜
Speaker Cord: 2-core cabtyre cord with diameter of 6 mm
Operating Temperature: -20℃ to +55℃
Dust/Water Protection: IP65
Finish: Horn, cover: ABS resin, off-white, paint Bracket: Stainless steel Net: Aluminum, gray, paint Screw: Stainless steel
Dimensions: 366 (W) × 230 (H) × 272 (D) mm
Weight: 3.1 kg
SKU: TOASPK07 -
Speakers & Mixers
TOA CS-64- SPLASH PROOF PROJECTION
Specification:
Rated Input: 6 W
Rated Impedance: 100 V line : 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line : 830 Ω(6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sound Pressure Level: 96 dB (1 W, 1 m) (330Hz – 3.3kHz, pink noise)
Frequency Response: 130 – 13,000 Hz
Speaker Component: 12 cm cone – type dynamic speaker (treated for splash proof) Coverage Angle Horizontal and Vertical 360° (500Hz), 210° (1kHz), 85° (2kHz), 45° (4kHz)
Finish: Horn, cover : ABS resin, off – white, paint Bracket : Stainless steel Net : Surface treated steel plate, dark-gray, powder coating Screw : Stainless steel
Dimensions: 233 (W) x 224 (H) x 249 (D) mm
Weight: 1.7 kg
SKU: TOASPK08 -
Speakers & Mixers
TOA CS-64- Splash Proof Projector Sound Speaker
Specification:
Rated Input: 6 W
Rated Impedance: 100 V line : 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line : 830 Ω(6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sound Pressure Level: 96 dB (1 W, 1 m) (330Hz – 3.3kHz, pink noise)
Frequency Response: 130 – 13,000 Hz
Speaker Component: 12 cm cone – type dynamic speaker (treated for splash proof) Coverage Angle Horizontal and Vertical 360° (500Hz), 210° (1kHz), 85° (2kHz), 45° (4kHz)
Finish: Horn, cover : ABS resin, off – white, paint Bracket : Stainless steel Net : Surface treated steel plate, dark-gray, powder coating Screw : Stainless steel
Dimensions: 233 (W) x 224 (H) x 249 (D) mm
Weight: 1.7 kg
SKU: n/a -
Speakers & Mixers
TOA ER-1215S-23W HAND GRIP MEGAPHONE
Specification:
Power Source: R14P (C) × 6 (9 V DC)
Rated Output: 15 W
Maximum Output: 23 W
Signal Sound: Siren (sounds at 5 seconds intervals) Battery Life Voice: Approx. 14 hours (JEITA)* Siren: Approx. 20 minutes (JEITA)*
Audible Range: Voice: Approx. 315 m (JEITA)* Siren: Approx. 500 m (JEITA)*
Diaphragm: Polyimide film (voice coil, bobbin)
Operating Temperature: -10 ℃ to +40 ℃
Finish: Horn, mouth, battery case and handle: ABS resin, red Strap: Nylon, black
Dimensions: 210 (W) × 291 (H) × 346 (D) mm
Weight: 1.2 kg (without batteries)
SKU: TOASPK10 -
Speakers & Mixers
TOA ER-2215W-23W SHOLUDER MEGAPHONE
Specification:
Power Source: R14P (C) × 6 (9 V DC)
Rated Output: 15 W
Maximum Output: 23 W
Battery Life: Voice: Approx. 9 hours (JEITA)*, Whistle: Approx. 20 minutes (JEITA)*
Signal Sound: Whistle (1.6 to 2.4 kHz)
Audible Range: Voice: Approx. 400 m (JEITA)* Whistle: Approx. 500 m (JEITA)*
Diaphragm: Polyimide film (voice coil, bobbin)
Operating Temperature: -10 ℃ to +40 ℃
Finish: Horn: ABS resin, light gray Microphone and other: ABS resin, gray Strap: Nylon, black
Dimensions: %%c210 × 336 mm
Weight: Body: 1.2 kg (without microphone and batteries) Microphone: 150 g
Option: Speaker stand: ST-16A
SKU: TOASPK11 -
Speakers & Mixers
TOA ER-2930W-45W SHOULDER MEGAPHONE
Specification:
- Whistle function
- Power Output: 30W Rated / 45W Max
- 10 D batteries (17 hrs)
- Battery Life Indicator
- Range: 800m (voice) / 1000m (whistle)
- Auxiliary Line Input
- External Microphone Input
- Anti-bacterial treatment for all models (mouthpiece/microphone and handle)
- High durability ABS or ASA resin construction
- Compact and lightweight
- Wide frequency range for enhanced audio quality
- Neodymium magnets and Polyimide speaker diaphragms
SKU: TOASPK12 -
Speakers & Mixers
TOA F-1000BT-WIDE-DISPERSION SPEAKER
Specification:
Enclosure: Bass-reflex type
Rated Input: 15 W (high impedance)
Power Handling Capacity: Continuos pink noise: 30 W (low impedance) Continuos program: 90 W (low impedance)
Rated Impedance: 8 Ω 100 V line: 670 Ω (15 W), 2 kΩ (5 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 330 Ω (15 W), 670 Ω (7.5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity: 87 dB (1 W, 1 m) at installation in 1/2 free sound field
Frequency Response: 85 Hz – 20 kHz, -10 dB at installation in 1/2 free sound field
Crossover Frequency: 5 kHz
Directivity Angle: Horizontal: 90゜, Vertical: 90゜
Speaker Component: Low frequency: 10 cm (4″) cone-type High frequency: Balanced dome tweeter Input Terminal Push-in terminal
Finish: Enclosure: HIPS, black Punched net: Surface-treated steel plate, black, paint Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint
Dimensions: 130 (W) × 202 (H) × 131 (D) mm (5.12″ × 7.95″ × 5.16″)
Weight: 2 kg (4.41 lb) (including the supplied brackets)
Accessory: Speaker bracket…1, Joint bracket…1, Wall bracket…1, Bracket fixing screw…1 set
Option: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10B (used for the horizontal speaker mounting), Cluster bracket: HY-CL10B, Speaker stand: ST-16A
SKU: TOASPK13 -
Speakers & Mixers
TOA F-2000B-WIDE-DISPERSION SPEAKER
Specification:
- Enclosure Type: Bass-reflex type
- Power Handling Capacity: 60W(continous pink noise)180W (continous program)
- Impedance: 8Ohm
- Sensitivity: 92dB (1w,1m)
- Frequency Response: 65-20,000Hz
- Crossover Frequency: 2.5kHz
- Directivity Angle: Horizontal 110°, vertical 100°, Horizontal 80°, vertical 80°(with horn adaptor)
- Speaker Componenrs: Low frequency 20 cm cone type. High Frequency, 25mm dome tweeter
- Input Terminals: Push-in terminal
- Finish: HIPS, black
- Dimensions: 224(W) × 373(H) × 235(D)mm
- Weight: 6.5 kg (14.33 lb) (including the supplied brackets)
- Accessories: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set
- Option: Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A
SKU: TOASPK15 -
Speakers & Mixers
TOA F-2000BT-WIDE DISPERSION SPEAKER-60
Specification:
Enclosure: Bass-reflex type
Rated Input: 60 W (high impedance)
Power Handling Capacity: Continuos pink noise: 60 W (low impedance) Continuos program: 180 W (low impedance)
Rated Impedance: 8 Ω 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W) 70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W)
Sensitivity: 92 dB (1 W, 1 m) at installation in 1/2 free sound field 93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter)
Frequency Response: 65 Hz – 20 kHz, -10 dB at installation in 1/2 free sound field
Crossover Frequency: 2.5 kHz
Directivity Angle: Horizontal: 110゜, Vertical: 100゜ Horizontal: 80゜, Vertical: 80゜ (with horn adapter)
Speaker Component: Low frequency: 20 cm (8″) cone-type High frequency: 25 mm (1″) dome tweeter
Input Terminal: Push-in terminal
Finish: Enclosure: HIPS, black Punched net: Surface-treated steel plate, black, paint Joint bracket, wall bracket: Steel plate, t2.0, black, paint Speaker bracket: Die-cast aluminum, black, paint
Dimensions: 244 (W) × 373 (H) × 235 (D) mm (9.61″ × 14.69″ × 9.25″)
Weight: 7.4 kg (16.31 lb) (including the supplied brackets)
Accessory: Speaker bracket…1, Joint bracket…1, Wall bracket…1, Bracket fixing screw…1 set, Horn adapter…1, Horn adapter mounting screw…4
Option: Ceiling mount bracket: HY-CM20B (used for the horizontal speaker mounting), Cluster bracket: HY-CL20B, Speaker stand: ST-16A
SKU: TOASPK48 -
Speakers & Mixers
TOA SC-615M-15W REFLEX HORN SPEAKER
Specification:
Rated Input: 15 W
Line Voltage: 100 V line or 70 V line
Rated Impedance: 100 V line: 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W) 70 V line: 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W)
Sound Pressure Level: 112 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level)
Frequency Response: 280 Hz – 12.5 kHz
Dust/Water Protection: IP65
Polarity: Hot: Black, Com: White
Operating Temperature: -20 ℃ to +55 ℃ (must be free from dew condensation)
Finish: Horn flare: Aluminum, off-white, powder coating Reflector horn and rear cover: ABS resin, off-white Bracket, Screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length)
Dimensions: 222 (W) × 179 (H) × 234 (D) mm
Weight: 1.3 kg
Option: Swivel bracket: YS-151S (Can be used instead of the supplied bracket.)
SKU: n/a